Channel letter clinching machines

Join channel-letter returns to their backs without staples, stitches or rivets. A floor press for production, a desktop clincher for smaller shops and a handheld tool for letters already built.

Which channel letter clincher?

MachineMade forBest at
LockNessProduction sign shopsDeep returns at 120+ cycles a minute, 150 mm jaw
Thor LetterSmaller shopsA lower-cost desktop clincher on a letter stand
Moose Jaw AirLarge or finished lettersTake the clincher to the letter

Why clinch channel letters

Nothing to buy per joint

No staples, stitches or rivets to stock. The punch and die form the joint from the metal itself.

Aluminum and steel

Clinch aluminum and steel returns, or rivet ACM and polycarbonate on LockNess.

One stroke per joint

Press the pedal and the joint is done, so long letters go together quickly.

Questions

What can a channel letter clincher join?

LockNess clinches aluminum and steel returns, and rivets ACM and polycarbonate with self-piercing rivets.

How is clinching different from stitching or stapling?

Clinching locks the two sheets into each other with a punch and die, so there is no wire, staple or rivet to buy, load or run out of.

Which machine should a smaller sign shop start with?

Thor Letter is the entry point: a desktop clincher on a letter stand. Shops running letters every day usually move to LockNess for its speed and deeper jaw.

Need help choosing?

Tell us about your parts and production. We'll recommend a machine that fits your application and budget.